Dxc 325 manual

Features and Notes on Use. Adoption of CCD. The advantages of this function are most obvious during playback of still or slow motion pictures. Various connection capability. Power sources. The camera and 1. Automatic adjustment and memory functions. Display and related functions. This pattern provides a useful reference when the operator manually adjusts the iris.

The lens can thus be controlled from the video camera without using a lens cable. Location of controls to avoid misoperations. Newly designed camera body and Iens grip. For operation from an AC power line, use the camera adaptor recommended for this camera. Be sure to cover the lens with the supplied lens cap when the video camera will not be used for a long period of time. The following phenomena may appear on the monitor screen while the DXC series color camera is used.

These phenomena are not indicative of a camera malfunction. Smear phenomenon. This may appear when a very bright object is shot. Light beit-like line smear phenomenon. A very bright object is shot. Electric light, fluorescent lamp, sunlight, strong reflected light, etc.

Video monitor screen. Operation of the viewfinder. Clean the cabinet, panel and controls with a dry soft cloth, or soft cloth lightly moistened with a mild detergent solution. Do not use any type of solvent, such as alcohol or benzine, which might damage the finish.

Do not discard the carton. It affords maximum protection whenever the camera is transported. Do not transport or. Repack it as it. If you have any questions about this camera, contact your authorized Sony dealer. Special Characteristics of a CCD. White dots White dots may appear in the video output if the camera is used under very high temperatures. Wavy pictures This may appear when fine stripes, straight lines, etc, are shot. Their images monitored on the screen look waty.

Note on the electronic shutter. If the GAIN selector is set to the 18 dB position when the electronic shutter is used, a clear picture may not be obtained. Use the electronic shutter under the lightirg conditions under which a clear picture is obtained wth the GAIN selector set to the 0 or 9 dB position. Location and Function of Controls. Viewfinder fitting and lock ring. Lens mount clamp ring. Screw hole for tripod U?

Filter ay fie Color temperature Lighting conditions. To stop recording, press the button again. When the button is released, the camera pictures can be monitored. If necessary, the grip can be detached from the video camera. ABL switch. Black balance can also be adjusted. The adjusted value will be automatically stored in the memory. This switch automatically returns to the center position. Use this position for adjusting the video monitor. At this position, the iris of the zoom lens attached to the camera will be automatically closed.

AUTO: Generally set the selector to this position. After the adjustment, the memorized white balance and black balance values are always obtained at this position. Use this position when there is no time to adjust the white balance. See page H horizontal PHASE control When two or more cameras are used, turn this control with a small screwdriver to adjust the H phase difference between the gen-lock input and video output signals.

OFF: Normally, set at this position. The following six shutter speeds can be selected on this camera head. The black level will be reduced to the appropriate level, and a well- contrasted picture will be obtained. Normally set the switch to OFF. If the zebra pattern is not necessary, set this switch to OFF.

In the character display modes 3 to 5 , the automatic white balance and black balance adjustment systems do not function. Accessory shoe. Cord clamps for viewfinder cord. VF connector 8-pin. Built-in microphone When the camera cable is connected to. Title characters displayed on the viewfinder screen are also output from this connector. Accessory Attachment. Microphone Attachment. The CACA microphone holder can also be attached in the same manner. Microphone adaptor. When the ECM is used, the microphone adaptor is not necessary.

Insert the microphone to the microphone holder, and tighten the screw. Tripod Attachment. Although the camera can be mounted on a tripod directly, use a VCT tripod attachment optional when mounting with a large viewfinder.

Camera detachment. VCT 12 tripod attachment. Fit the tripod screw into the screw hole which matches. Tighten the screw. Red button. While depressing the red button, slide the lever to the left to release the lock. Remove the camera. Tighten the. Power Sources. Note on priority of power sources. Power from the Battery Pack Compartment. Use a fully charged NP-1A battery pack optional by inserting it into the battery pack compartment.

Installing an NP-1A battery pack. Push this part and pull up. Battery pack compartment. Camcorder Accessories Manuals. Camera Accessories Manuals. Camera Flash Manuals. Camera Lens Manuals. Can Opener Manuals. Car Amplifier Manuals. Car Satellite Radio System Manuals. Car Speaker Manuals.

Car Stereo System Manuals. Car Video System Manuals. Card Game Manuals. Carrying Case Manuals. Cash Register Manuals.

Cassette Player Manuals. CD Player Manuals. Cell Phone Manuals. Cell Phone Accessories Manuals. Clock Manuals. Clock Radio Manuals. Coffeemaker Manuals. Computer Accessories Manuals. Computer Drive Manuals. Computer Hardware Manuals. Computer Keyboard Manuals. Computer Monitor Manuals. Forgot your password?

Sign up now. Sign Up.